BegerCool DiamondShield 15

BegerCool DiamondShield 15

Category: EXTERIOR PAINT

Specifications
Details

Features

Topcoat  (water)
Grade  Super Ultra Premium  
type coating  gloss and smooth
the paint  35-40 m / gallon / trip.
Can be mixed with Beyer Color Design

property

Durable 15 years
25% power savings
Heat reflecting more than 94%
Inhibit dust
Clean yourself
Water and dirt
Solid color Excellent midfield
Colorful
Abrasion resistant
Prevent alkalis and stains from mortar.
Fungus and algae
Lead-free and Mercury
Free of volatile substances that are harmful to health.

How to use
Protect the house from the deterioration of the paint film from the destruction of sunlight.

Paint system.

Step 1 Surface preparation.
New mortar:  Allow the mortar to dry completely for at least 1 month and have less than 14% moisture content.
Old cement surface:  Scrub old paint deteriorate. The area with fungus or moss must be scrubbed with Beyer mold free M-001.
Tips : Before painting. The surface must be cleaned of dust and debris, or the sandpaper should be thoroughly sanded. Including grease and dirt. Repairing cracks on the surface with Putty Acrylic Foam 200


Step 2: Paint the primer
Old surface texture or old surface of the Punta : Painted concrete primer, moisturizing Beyer Ultra Hyde B-2100 primer.

Allow to dry for at least 1-2 hours or paint a plaster foundation, moisturizing 1 unit of water to dry for 2 hours.


Recommendation : For mortar surfaces with a moisture content above 14% but not more than 35%, it is recommended to use a cement mortar primer. Bayer Water Block DO-010 in the first layer and leave for 3-4 hours, followed by a moist primer. Then painted acrylic face over 100%


Step 3: Overlaying  Apply 2 drops of acrylic water 100% pure Bayer Coil 15 for 2 hours, leaving the first coat to dry for 2-3 hours, then coat the next coat.

 

View more about BegerCool DiamondShield 15 on main site