Details

---

Painting system

Stage 1 Surface Preparation

New plaster surface:

- Allow the mortar to dry for about 1 month and have a moisture content of less than 14%.

Free of dust and dirt.

- Areas with cracked walls or cracked sesame size not more than 1 mm to fill with.

Beyer Acryl Filler F-200 or Beyer Acrylic Silicone F-001

Cracks 1-10 mm should be sanded with sandpaper before painting.

- The case is a lightweight brick wall. Or precast wall Recommended to adjust the skin smooth.

Beyer Kim Coat 101 and paint a new plaster foundation, hot waterproof version of Bayer Cool Plus.

Number 5000 for 1 job to increase adhesion and protection.

Sparkling from the plaster walls or Beige Skim Coat 102 without the need to paint.

- For mortar walls with a moisture content higher than 14%, it is recommended to use Beyer Universal Primer.

Multiples Primer B-1900 1



Old surface or degraded surface:

- Scrub the paint and degrease the chalk out. (Do not use abrasive wire brush)

And clean Free of dust and dirt.

- areas with fungus or moss Washed with Bayer Mold free-M-001.

- Areas with cracked walls or cracked sesame size not more than 1 mm to fill with.

Beyer Acryl Filler F-200 or Beyer Acrylic Sealant F-001

Cracks 1-10 mm should be sanded with sandpaper before painting.

- In case the old cement surface and film are in good condition. Can be painted with a beyer day.

- In the case of old cement surface deterioration and very dusty chalk. The walls are dust from the skim.

Apply Beige Multipurpose Primer Beige Primer B-1900 1

To help better adhesion before painting Beyer Day.



The surface is already painted:

- Scrub the paint and degrease the chalk out. (Do not use abrasive wire brush) and do

Clean, free of dust and dirt.

- In case of stains, stain such as coffee stains, pencils, pens on the original surface.

It is advisable to clean with soap and water, and scrub with a soft brush. Not recommended to scrub.

Wire brush to dry the surface completely. Then the beyer painted day, highlighted by rolling.

Spotting spots

- In the case of the original wall is dark, such as dark blue, dark red, dark brown and want to overlay.

Light colored beige may need to be rolled around in some areas of the original color.



Step 2

Topcoat: Beyer Day only



Recommendations / Recommendation

Before applying Beyer Day, use a clean spatula. Stir the mixture for at least 10 minutes before use.
The standard rollers should be used in combination with standard rolling trays. Can be rolled into paint roller thoroughly.
Rolling should be done in small areas. And roll in W (W) to reduce the rolls.
Do not press the roller while painting.
During rolling, if the roller is dry and the paint film is pulled. Add water to paint roller.